Page 1
MSM323-R Integrated Services Access Point Quickstart This Quickstart introduces the MSM323-R (US J9342A, WW J9345A) Integrated Services Access Point (formerly the MSC-3300R MultiService Controller) and shows you how to get started using it. After following the directions in this Quickstart, see the MSC-3000 Series Admin Guide available at: www.procurve.com/customercare/support/manuals/index.htm.
Network cables may occasionally be subject to hazardous transient voltages (caused by Radios and antennas lightning or disturbances in the electrical power grid). The MSM323-R has two radios each with a single antenna. The antenna connectors are • Handle exposed metal components of the network with caution.
Page 3
You will have to provide an effective earth ground for the MSM323-R, at least one of its Hold the Screw Nut (E) vertically, with the open threads facing up, and drop the Body (f) antenna surge suppressors, and the Ethernet surge suppressor.
(Refer to photo below: “Grounded body (via grounding lug).”) Attach the supplied Plug (G) with the socket on the MSM323-R, hold it firmly in place, and tighten the Screw grounding lug (through the bracket) to one of the lower screw holes on the MSM323-R Nut (E) by hand.
Remove the crossover Ethernet cable, and using a standard Ethernet cable connect the product will be used and select Save. PoE injector Data In port to the network on which the MSM323-R will be used. For the The country must be set accurately to the country in which the MSM323-R...
Connect to the wireless network. For example, from the Windows XP Start menu, select Assigning an IP address The Internet port of the MSM323-R defaults to being a DHCP client. If your Internet service Settings > Network Connections > Wireless Network Connections. The list of available provider or network administrator requires a different configuration, for example static IP wireless networks appears.