Toshiba 32P1400 Series Owner's Manual page 9

Quick Setup
Menu Language
2
Press  or  to select the menu language .
3
Press OK, to display the Location menu.
Press  or  to select Store or Home. For
normal home use, select Home.
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in
a shop, etc.
Location
To use the TV for displaying in a store showroom, please select
[Store]. [Home] mode is recommended for normal use.
4
Press OK to display the Auto Tuning menu, and
then  or  to select On or Off .
Auto Tuning
Auto Signal Booster
5
Select Start Scan and press OK to start the
automatic search.
Auto Tuning
Progress
1%
When the automatic search is completed,
the TV will automatically appear the Manual
Tuning menu.
Use the Manual Tuning operation if desired
channels cannot be preset with the Auto
Tuning or if you would like to preset channels
to specifi c position numbers one by one.
Manual Tuning
Pos.
0
1
2
3
4
5
6
7
English
Home
On
Start Scan
Found
0
Label
6
Press  or  to select the programme position
you want to arrange and press OK to display the
breakdown menu.
Press  or  to select an item, then press  or
 to select the item as shown below.
Manual Tuning
Position
1 B/G A
A C
B D
A. Position selection
B. System (Sound) (- page 18)
C. Colour System (- page 18)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system (-
page 18).
D. Position skip selection
Press  or  to turn the position skip option
on "8" or off "(". The position will then be
skipped when you select channels with PU
or Pu. The "8" mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classifi caiton.
F. Channel
The channel number on which a station is
being broadcast.
G. Channel search operation
Press  to search up the band or  to search
down the band.
Press  or  repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
H. Manual Fine Tuning
Press  or  until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the  or  to turn the Signal Booster
On or Off .
– 9 –
C 1 0 On
E G I
F H J