Voice Setting; Set Flash Time; Set Dial Mode - Maxcom KXT 481 SOS Instruction Manual

Select main menu option of "LCD LANGUAGE", then press "OK/DIAL" key to enter language options,
press or key to select language for LCD display, there are 11 kinds of languages on the phone.
Please note: if user select language from Italian/English/ French/ German/ Spanish from LCD display,
the voice type of talking caller ID, pre-dialing, menu prompt and SOS message are also correspondingly
changed. If other languages are selected for LCD display, the voice of talking caller ID, pre-dialing and
SOS message will be closed.

7.8. VOICE setting

Select main menu option of "VOICE", then press "OK/DIAL" key to select voice from Italian/English/
French/ German/ Spanish.
the voice of talking caller ID, pre-dialing and SOS message will be changed correspondingly. (Please not:
if voice is modified after LCD language setting, the language of voice type can be different from language
type of LCD display).

7.9. Set flash time

Select main menu option of "SET FLASH TIME", then press "OK/DIAL" key to enter flash time selection,
the following flash time type of 100ms/270ms/300ms/600ms/80ms can be selected.

7.10. Set Dial Mode

The telephone dial mode is set to "TONE" as ex-factory setting, you need not change it if it is not specially
requested by PABX.
Select main menu option of "SET DIAL MODE", then press "OK/DIAL" key to select "TONE" or "PULSE",
press "OK/DIAL" key to confirm.
17