Gain - Yamaha MG24/14FX Service Manual

MG24/14FX
MG32/14FX
ON switch
PFL switch
1-2 switch
3-4 switch
ST switch
Fader
• DIGITAL EFFECT 1, 2
PROGRAM select switch
PARAMETER control
AUX1-4 level control
ON switch
PFL switch
1-2 switch
3-4 switch
ST switch
EFFECT RTN fader
• MASTER control
GROUP1-4 TO ST assign switch
GROUP1-4 TO ST PAN control
GROUP1-4 master fader
ST, MONO master fader
LPF (MONO) switch
LPF (MONO) frequency control
AUX1-6, EFFECT1, 2 send master control
RETURN1, 2 to AUX1-4, ST level control
RETURN1, 2 PFL switches
2TR IN to ST level control
2TR IN PFL switch
ST SUB OUT
TB level control
TB to AUX1-4, ST assign switches
PHONES level control
METER source select switch
All AFL switches
• Others
PHANTOM switches

4.2 Gain

The output levels shall be within the range specified in the Table 4.2-1~11.
IN the column named PAN or BAL, a character "C" means center. About the mark (#) or ($), refer to section 4.3 or 4.10.
When PAN or BAL control is set to center, do not turn on two or three switches of [1-2], [3-4] or [ST].
In case of two or three of the switches ON, the output level is 1 or 2dB lower.
Table 4.2-1 CH INPUT A (1-16: MG24/14FX, 1-24: MG32/14FX) [dBu]
Do not insert jacks to INPUT B.
INPUT
INPUT Gain PAD PAN
level
-70 MAX
A
-26 MIN
0 MIN
66
GROUP1, 3 GROUP2, 4
OUT
+14 ±2 (#, $1)
L
+14 ±2 (#, $2)
OFF R –
C –
+14 ±2 *1 (#)
OFF L
+14 ±2 *1
ON L
ON (LED shall light) when taking measurement only / OFF otherwise
ON (LED shall light) when taking measurement only / OFF otherwise
ON when taking measurement only / OFF otherwise
ON when taking measurement only / OFF otherwise
ON when taking measurement only / OFF otherwise
MAX
1
MIN
MAX
ON (LED shall light) when taking measurement only / OFF otherwise
ON (LED shall light) when taking measurement only / OFF otherwise
ON when taking measurement only / OFF otherwise
ON when taking measurement only / OFF otherwise
ON when taking measurement only / OFF otherwise
MAX
OFF
Center
MAX
MAX
OFF
MIN (80Hz)
MAX
MAX when taking measurement only/ MIN otherwise
ON (LED shall light) when taking measurement only / OFF otherwise
MAX when taking measurement only/ MIN otherwise
ON (LED shall light) when taking measurement only / OFF otherwise
MAX
MAX
ON (LED shall light) when taking measurement only / OFF otherwise
MAX when taking measurement only/ MIN otherwise
ST, AFL/PFL
ON when taking measurement only / OFF otherwise
OFF
ST OUT AUX1-4 OUT
OUT (L, R) PER OFF PRE ON
+16 ±2 (#, $2)
– –
– –
+11 ±2 (#, $2)
– –
– – –
– – –
AUX5, 6, PHONES OUT
EFFECT1, 2 OUT (L, R) *2
+6 ±2 +16 ±2 (#, $2) -1.0 ±2 (#, $2)
– –
– –
– –
– –
–
–
–
–