Thrustmaster T300RS User Manual

Thrustmaster T300RS User Manual

For playstation 3 – playstation 4
Hide thumbs Also See for T300RS:

Advertisement

FOR P
S
3 – P
S
4
LAY
TATION®
LAY
TATION®

User Manual

WARNING:
To ensure that your T300 RS racing wheel functions correctly
with games for PlayStation
3 or PlayStation
4,
®
®
you may be required to install the games' automatic updates
(available when your console is connected to the Internet).
1/18

Advertisement

Table of Contents
loading

Summary of Contents for Thrustmaster T300RS

  • Page 1: User Manual

    FOR P 3 – P TATION® TATION® User Manual WARNING: To ensure that your T300 RS racing wheel functions correctly with games for PlayStation 3 or PlayStation ® ® you may be required to install the games’ automatic updates (available when your console is connected to the Internet). 1/18...
  • Page 2: Technical Features

    6 MODE button + red/green indicator light 10 Attachment system 11 Metal fastening screw 12 Thrustmaster Quick Release 15 Racing wheel USB cable and connector 13 L3/R3 buttons 16 Shifter (gearbox) connector 14 Power supply connector (type A or B)
  • Page 3 PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET: PLEASE READ BEFORE PROCEEDING! Your racing wheel’s power supply varies according to the country where you purchased your device. The power supply can be: Internal, with: * a power supply unit located directly inside the racing wheel’s base, with a type A connector.
  • Page 4 * Do not let any dust build up on the air vents. For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet. THRUSTMASTER DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF ®...
  • Page 5 Warning – Injuries due to Force Feedback and repeated movements (continued) * If the symptoms or pain indicated above persist when you start playing again, stop playing and consult your doctor. * Keep out of children’s reach. * During gameplay, always leave both hands correctly positioned on the wheel without letting it go completely.
  • Page 6 To display the firmware version that your racing wheel is currently using and update it if required: on PC, visit http://ts.thrustmaster.com. In the Updates and Downloads section, click PlayStation  Wheels / T300 RS, then select Driver/Firmware and follow the instructions describing the download and installation procedure.
  • Page 7 Once you have installed the racing wheel, rotate it 180° (when facing the wheel, the PlayStation® logo should be upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release (12) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive force), turning it clockwise.
  • Page 8 ADJUSTING THE PEDALS’ HEIGHT AND SPACING Using a Phillips screwdriver (not included), remove the 2 attachment screws holding the pedal heads to the pedal arms. Next, adjust the pedal heads’ height and spacing to suit your preferred driving style: - 6 different positions are available for the gas pedal. - 6 different positions are available for the brake pedal.
  • Page 9 ATTACHMENT / DIRECTION REMOVAL To tighten: Turn the screw counterclockwise To release: Turn the screw clockwise 9/18...
  • Page 10 Layout diagrams for cockpits (for positioning the racing wheel’s base and/or the pedal set) are available at http://ts.thrustmaster.com: in the Updates and Downloads section, click PlayStation ...
  • Page 11: Setting Up Racing Wheel (Ps3/Ps4)

    ® ® the required position for the USB sliding switch (5) according to the game being played) is available at: http://ts.thrustmaster.com (in the Updates and Downloads section, click PlayStation / Wheels / T300 RS).  This list is updated regularly.
  • Page 12 USB plug to your computer and complete the installation. 3. Once the installation is complete, click Finish and restart your computer. 4. Select Start / All Programs / Thrustmaster / FFB Racing Wheel / Control Panel to open the Game Controllers window.
  • Page 13 PC MAPPING 13/18...
  • Page 14: Internal Temperature Sensor

    AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and connect the racing wheel’s USB connector to the console. During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 900 degree angle, before stopping at the centre.
  • Page 15: Mode Button For The Pedal Set

    When using this pedal set, make sure that the indicator light remains red, or else the gas pedal will not function properly. The T300 RS is also compatible with Thrustmaster pedal sets featuring 3 pedals (sold separately); these allow you to electronically swap the accelerator and clutch pedals.
  • Page 16: Technical Support

    TECHNICAL SUPPORT If you encounter a problem with your product, please go to http://ts.thrustmaster.com and click Technical Support. From there you will be able to access various utilities (Frequently Asked Questions (FAQ), the latest versions of drivers and software) that may help to resolve your problem. If the problem persists, you can contact the Thrustmaster products technical support service (“Technical...
  • Page 17 Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).
  • Page 18: Environmental Protection Recommendation

    COPYRIGHT © 2014 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. “ ”, “PlayStation”, “ ” and “ ” are registered trademarks of Sony Computer Entertainment, Inc. “ ” is a trademark of the same company.

Table of Contents