Connections - Samsung HW-H7500 User Manual

I CO_tECT/O_S
CONNECTIONS
CONNECTING THE W_RELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect
wirelessly) automatically when the main unit and subwoofer are turned on_If the Link indicator ( _, ) does not
light when the main unit and subwoofer are turned on, pleaseset the ID by following the procedure below_
1. Plug the power cords of the main unit and
subwoofer into an AC wall outlet_
2. Pressthe mD SETbutton on the back of the
subwoofer with a small, pointed object for
5 second£
o The STANDBYindicator is turned off and the
LINKindicator (Blue LED) blinks quicHy_
S. While the main unit is powered off (in STANDBY
mode), press and hold the _ (Mute) on the
remote control for 5 second£
4. The mD SETmessageappears on the Soundbar's
display_
5. To finalize the link, turn the main unit's power on
while the subwoofer's Blue LED blink£
o The main unit and the subwoofer should now
be linked (connected)_
. The Link indicator (Blue LED) on the
subwoofer should be on_
If the Link indicator is not solid blue, the
linking process has failed_Turn off the main
unit and start again from Step 2_
. You can enjoy better sound from the wireless
subwoofer by selecting a Sound Effect_
(See page 10)
• Before moving or installing the product,
be sure to turn off the power and
disconnect the power cord_
• If the main unit is powered off, the
wireless subwoofer will be in standby
mode and the STANDBYLEDon the upper
side will come on after the Link indicator
(Blue LED) blinks for 30 second£
• If you use a device that uses the same
frequency (2_4GHz) asthe Soundbar near
the Soundbar, interference may cause
some sound interruption_
• The transmission distance of the wireless
signal between the main unit and
subwoofer is about 33 ft, but may vary
depending on your operating
environmen£ If a steebconcrete or metallic
wall is between the main unit and the
wireless subwoofer, the system may not
operate at all, because the wireless signal
cannot penetrate metal_
• If the main unit doesn't make a wireless
connection, follow steps 1-5 in the left
hand column to re-set the connection
between the main unit and wireless
subwoofer_
The wireless receiving antenna is built into
the wireless subwoofer_ Keepthe unit
away from water and moisture_
Foroptimal listening performance, make
sure that the area around the wireless
subwoofer location is clear of any
obstruction£
14