Ball FTJMAU-15-01 User Manual page 11

G. At the end of the cooking process, the Jam & Jelly Maker will beep again to indicate
the process is complete. After the beep, press the
power cord to turn off the unit.
H. Remove the Stirrer, taking care not to touch any metal parts or glass surfaces. Set
aside either in the sink or on an oven-safe plate, as the metal rod inside the Stirrer will
be hot.
WARNING! To reduce the risk of serious burns, use extreme caution when
handling parts after use. As with any cooking appliance, metal parts, glass
surfaces, and even certain plastic parts can become extremely hot to the
touch. Oven mitts should be used when handling the appliance immediately
after or during use.
I. If necessary, skim foam from top of jelly and preserve, following the steps on
Preserving Instructions in the Recipe Book. Never attempt to pour jelly from the Pot
into another container – always use a non-metal spoon or ladle (such as wood,
bamboo, plastic or silicone) to remove the jelly from the Pot.
You must wait 30 minutes between making batches of jam or jelly
with this unit.
COOL TIME
The unit is programmed to cool for 30 minutes between batches. The display
will show "CO" when in the cooling mode and is not ready for the next batch.
When "--" appears in the display the appliance is ready for the next batch.
cancel
button and unplug the
a
11