Advertisement

Quick Links

ED-CD6KG
Dryer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ED-CD6KG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Eurotech ED-CD6KG

  • Page 1 ED-CD6KG Dryer...
  • Page 2 Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.
  • Page 3: Important Safety Information

    Important safety information This section includes safety information or adaptors to connect the dryer to that will help protection from risks of power supply in order to decrease the personal injuries or materialistic damages. risk of electric shock. Failure to follow these instructions •...
  • Page 4: Intended Use

    • This product must be grounded. Turn off the machine, turn off and Grounding installation decreases the contact an authorised service agent. risk of electric shock by opening a path • Do not stop the dryer before the drying with low resistance for the electricity cycle comes to an end unless you will flow in case of a malfunction or failure.
  • Page 5: Package Information

    Children’s safety • Electrical appliances are dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine. • Packaging materials are dangerous to children. Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives.
  • Page 6: Appropriate Installation Location

    Installation Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’s responsibility. BInstallation and electrical connections must be carried out by a qualified personnel. A Prior to installation, visually check if the product has any defects on it.
  • Page 7: Adjusting The Feet

    C Never unscrew the adjustable feet from their housings. Electrical connection Connect the machine to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table. Our company shall not be liable for any damages that will arise when the machine is used on a circuit without grounding.
  • Page 8: Disposing Of Packaging Material

    Disposing of packaging mate- rial Packaging materials are dangerous to children. Keep packaging materials in a safe place out of reach of children. Packaging materials of your product are manufactured from recyclable materials. Sort and dispose of them in accordance with recycled waste instructions.
  • Page 9: Initial Preparations For Drying

    Initial preparations for drying hings to be done for energy programme. saving: A B C • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them.
  • Page 10: Preparing Laundry For Drying

    Correct load capacity not be dried in the product since they emit flammable or explosive vapor. • Do not dry items cleaned with industrial chemicals in the dryer. • Do not dry your unwashed laundry in the dryer. • Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty...
  • Page 11: Loading The Laundry

    Loading the laundry Following weights are given as examples. 1. Open the loading door. Approximate Home articles 2. Place the laundry in the machine weights (g) without compressing. Cotton quit covers 3. Push the loading door to close. 1500 (double) Ensure that no items are caught in the door.
  • Page 12: Control Panel

    Selecting a Programme and Operating Your Machine Control panel Jeans Shirts Delicates Express 35 Iron Dry Synthetics Start/ Freshen Up Cupboard Dry Clean Filter Drying Pause Water Tank Full Iron Dry 10 min Iron Dry Cupboard Dry Cupboard Dry Buzzer Cancel 20 min End/Anticreasing...
  • Page 13: Preparing The Machine

    Preparing the machine with this programme. It dries at a lower temperature compared to the cottons 1. Plug in your machine. programme. It is recommended for your 2. Place the laundry in the machine. synthetic laundry (such as shirts, blouses, 3.
  • Page 14 them after the programme ends in order to prevent them being creased. •Freshen up Only ventilation is performed for 10 minutes without blowing hot air. You can air your clothes that have been kept at closed environments for a long time thanks to this program to deodorize unpleasant odors.
  • Page 15: Program Selection And Consumption Table

    Program selection and consumption table Approximate Spin speed in amount of Drying time washing machine Programs Capacity (kg) remaining (minutes) (rpm) humidity Cottons / Coloreds Cupboard dry 1000 % 60 Cupboard dry plus 1000 % 60 Iron dry 1000 % 60 Express 35 1200 % 50...
  • Page 16: Auxiliary Function

    Auxiliary function illuminated until the next step. “Final / Anti-creasing”: Cancel audio warning - Illuminates when the program comes Your dryer will give an audio warning when to an end and anti-creasing function is the programme comes to an end. If you activated.
  • Page 17: Childproof Lock

    laundry. lock is active. Press the buttons for 3 3. Press “Start/Pause/Cancel” button to seconds to deactivate the child-proof start the programme. lock. Single beep will be heard and CAny laundry added after the drying child-proof lock will be deactivated. A A double beep will be heard if you turn process has started may cause the dried clothes in the machine intermingle...
  • Page 18: Maintenance And Cleaning

    Maintenance and cleaning Filter Cartridge / Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Filter Cartridge”. Sensor C Such fibre and lint are generally formed during wearing and washing. C Always clean the filter and the inner surfaces of the cover after each drying process.
  • Page 19: For The Condenser

    Water tank; 3-If there is lint accumulation in the funnel The moisture in the damp laundry is taken of the water tank, clean it under running from the laundry and condens ed. Drain water. the water tank after each drying cycle or 4-Place the water tank into its seat.
  • Page 20 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 6. Close the kick plate cover. 20 EN...
  • Page 21: Suggested Solutions For Problems

    Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. •...
  • Page 22 “Condenser cleaning” symbol is on. • Filter drawer/Condenser might have not been cleaned. Clean the filters in the condenser/filter drawer under the kick plate. A Call an authorised service if the problem persists. 22 EN...

Table of Contents