Service; Cleaning; Device Overheated; Fw Update - Philips PicoPix PPX 4010 User Manual

5 Service

Cleaning

DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning flu-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
DANGER!
Do not use any Liquid Cleaning Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coat-
ing film on the lens.

Device Overheated

A overheat symbol appears if the device is overheated.
The device behaves as follows:
1 The fan turns to maximum level.
2 An overheating symbol appears on the screen and
playback is interrupted.
3 The fan runs at maximum and after the device has
cooled down, you can continue playback.
Service

FW update

1 Prepare a USB key (not provided) and a Dual Female
USB adaptor (not provided, see picture).
2 Before, copy the file «MSTFLASH.bin» to the root
directory of USB key.
3 Connect USB key to Main USB port of USB Y cable
via a USB dual female adaptor.
4 Connect micro USB port of Y cable to device.
5 Connect USB port of thinner cable at Y side, to a 5V/
2A adaptor and connect to the wall outlet.
6 Waiting for 5 minutes, then your product start up
and you can check the right down corner of screen,
the version of FW have changed to new version.
9