Multi Function Display; Models Without Multi Function Display - Subaru Impreza 2016 Owner's Manual

3-42
Instruments and controls/Multi function display
Languages
Operate the or switch on the
steering wheel to display the preferred
language. Then pull the /SET switch to
select the displayed language.
EyeSight (models with EyeSight
system)
NOTE
For models with the EyeSight system,
refer to the Owner s Manual supple-
ment for the EyeSight system.
After entering the EyeSight menu, select
one of the following menus.
Warning Volume
The volume of the warning buzzer that
sounds when the EyeSight system is in
use can be set in 3 stages ( Max , Mid
and Min ).
Lead Vehicle Acquisition Sound
When adaptive cruise control is used, the
buzzer that sounds if a vehicle is detected
in front or if detection is not possible can
be activated or deactivated. Select On to
activate the buzzer. Select Off to deac-
tivate the buzzer.
Lead Vehicle Moving Monitor
Function
When adaptive cruise control is used, the
buzzer that sounds if a vehicle in front has
started can be activated or deactivated.
Select On to activate the buzzer. Select
Off to deactivate the buzzer.
BSD/RCTA (if equipped)
After entering the BSD/RCTA menu,
select the Warning Volume menu. You
can set the volume of the warning buzzer
that sounds when the function of the
RCTA (Rear Cross Traffic Alert) has been
activated. You can select Max , Mid ,
Min or Off .
Default Settings
Select Yes to use the menu screen to
restore customized settings to the factory
default settings. Select No to return to
the previous screen without restoring to
the factory default settings.

Multi function display

Models without multi func-
tion display
NOTE
For models with information display
(black and white), refer to Information
display 3-32.
The U.S.-spec models are not equipped
with the multi function display. The other
models may be equipped with the multi
function display or not, depending on the
model.