Firex AD Instructions Manual

120v ac smoke alarm with 9v battery back-up
Hide thumbs Also See for AD:

Advertisement

120V AC
Smoke Alarm
9V Battery
with
Back-up
SMOKE ALARM DESCRIPTIONS
• Model AD and ADC — Ionization type smoke alarm. This type of smoke
alarm responds fastest to fast burning fires with hot, open flame and
small or invisible smoke particles.
• Model PAD — Photoelectric smoke alarm. Responds to slow burning,
visible smoke caused by smoldering fires. May reduce false/
nuisance alarms caused by cooking or high humidity.
SMOKE ALARM FEATURES
• Model ADC features a False Alarm Control™ which, when activated,
quiets unwanted alarms for up to 15 minutes.
• This smoke alarm is powered by 120V AC and a 9-volt battery back-up
source. AC/DC smoke alarms offer added protection in the event of a
power failure or a drained battery.
• Unique power connector prevents interconnection with incompatible
smoke alarms or security systems.
• This smoke alarm may be interconnected with as many as 11 other
Firex model AD, ADC, FX1218 and PAD smoke alarms, or as many as
6 Firex model ADH heat alarms for a total of not more than 18
interconnected devices.
• Optional tamper-resist feature can safeguard against tampering.
• Unique "battery missing" signal. The smoke alarm will not attach to the
mounting bracket if a battery is not in the battery pocket.
• Improperly connected or weak battery signal. The smoke alarm will
sound a short beep about once a minute if the battery is weak or
improperly connected.
• Separate green and red LEDs indicate whether the smoke alarm is
receiving AC and DC power, working under normal operation, in alarm,
or under false alarm control.
• Loud alarm horn—85 decibels at 10 feet—alerts you of an emergency.
• Test button checks smoke alarm operation.
Smoke Alarm
1
©1999 Maple Chase Company
IONIZATION
MODELS AD, ADC
PHOTOELECTRIC
MODEL PAD
PLEASE READ AND SAVE
THIS MANUAL
Installer: Please leave this
manual with the product.
®
110-762

Advertisement

Table of Contents
loading

Summary of Contents for Firex AD

  • Page 1 Installer: Please leave this manual with the product. SMOKE ALARM DESCRIPTIONS • Model AD and ADC — Ionization type smoke alarm. This type of smoke alarm responds fastest to fast burning fires with hot, open flame and small or invisible smoke particles.
  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION PLEASE READ AND SAVE THESE INSTRUCTIONS • This smoke alarm requires constant 120-volt, AC power AND a working 9-volt battery to operate properly. This smoke alarm WILL NOT work if AC power is not connected or has failed or been interrupt- ed for any reason AND the battery is removed, drained (a "beep"...
  • Page 3: Smoke Alarm Placement

    fast-burning, explosive, or intentional. Others are caused by care- lessness or safety hazards. Smoke may not reach the smoke alarm QUICKLY ENOUGH to ensure safe escape. • Smoke alarms have limitations. This smoke alarm is not fool-proof and is not warranted to protect lives or property from fire. Smoke alarms are not a substitute for insurance.
  • Page 4 FOR BEST PROTECTION, WE RECOMMEND THAT YOU INSTALL A SMOKE ALARM IN EVERY ROOM. In addition, we recommend that all smoke alarms be interconnected. Typical Efficiency Home (Apartment) • Install a smoke alarm on KITCHEN SLEEPING LIVING AREA the ceiling or wall closest to AREA the sleeping area.
  • Page 5 IMPORTANT SMOKE ALARM PLACEMENT AND EXCEPTION INFORMATION: • Install a smoke alarm as close to 4 IN (0.1m ) CEILING the center of the ceiling as possi- 4 IN ACCEPTABLE HERE ble. If this is not practical, mount (0.1m ) MINIMUM NEVER HERE no closer than 4 inches from a...
  • Page 6: Installing Smoke Alarm

    HOW TO INSTALL THIS SMOKE ALARM DANGER: ELECTRICAL SHOCK HAZARD. Turn off power at the main fuse box or circuit breaker by removing the fuse or switching the circuit breaker to the OFF position. WARNING: This smoke alarm should be installed only by a qualified electrician.
  • Page 7 This smoke alarm may be interconnected with as many as 11 other Firex model AD, ADC, FX1218 and PAD smoke alarms, or as many as 6 Firex model ADH heat alarms for a total of not more than 18 interconnected devices. DO NOT connect to any other type or model smoke alarm.
  • Page 8: False Alarm Control

    FALSE ALARM CONTROL™ Model ADC features a False Alarm Control™ that, when activat- ed, quiets unwanted alarms for up to 15 minutes. To use the False Alarm Control™: Press and release the test button during an unwanted alarm. The alarm should stop within ten seconds. This means the smoke alarm is in False Alarm Control™.
  • Page 9: Maintenance And Cleaning

    MAINTENANCE AND CLEANING In addition to weekly testing, this smoke alarm requires yearly battery replacement and periodic cleaning to remove dust, dirt, and debris. DANGER: ELECTRICAL SHOCK HAZARD. Turn off power at main service panel by removing fuse or switching appropriate circuit breaker to OFF position before replacing battery or cleaning smoke alarm.
  • Page 10: Practice Fire Safety

    If the smoke alarm is no longer under warranty, have a licensed electrician replace the smoke alarm immediately with a compara- ble Firex brand smoke alarm. PRACTICE FIRE SAFETY If the smoke alarm sounds its alarm horn, and you have not pushed the test button, it is warning of a dangerous situation.
  • Page 11: Troubleshooting

    TROUBLESHOOTING DANGER: Always turn off power at main fuse box or circuit breaker before taking trouble- shooting action. WARNING: DO NOT disconnect battery or AC power to quiet an unwanted alarm. This will remove your protection. Fan the air or open a window to remove smoke or dust.
  • Page 12: Warranty Information

    WARRANTY INFORMATION 5-YEAR LIMITED SMOKE ALARM WARRANTY AND 10-YEAR LIMITED ULTRALIFE U9VL-J LITHIUM BATTERY WARRANTY (WHEN SOLD WITH MAPLE CHASE COMPANY SMOKE ALARM) Maple Chase Company warrants to the original consumer purchaser each new smoke alarm to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase.

This manual is also suitable for:

AdcPadFx 1218

Table of Contents