Table of Contents
Advertisement
4.
Press the board firmly until the
BMC socket retaining clips snap
back and secure the board in
place.
When installed, the board
appears as shown.
5.
Reinstall the server system cover, then connect the power plug to a
grounded wall socket.
6.
Insert the LAN cable plug to the LAN port for server management.
Refer to the Appendix for the location of the LAN port for server
management on various server motherboards.
7.
For direct LAN configuration, connect the other end of the LAN cable
to the local/central server LAN port.
For connection to a network hub or router, connect the other end of
the LAN cable to the network hub or router.
A S U S A S M B 2
A S U S A S M B 2
A S U S A S M B 2
A S U S A S M B 2
A S U S A S M B 2
2 - 3
2 - 3
2 - 3
2 - 3
2 - 3
Advertisement
Table of Contents
