Philips GC8420 Service Manual page 5

DISASSEMBLY ADVICE - STAND
Disassemble TRAY RUBBER CAP FRONT 52
Disassemble TRAY RUBBER CAP REAR 51
Remove Screws J1, J2, J3
Disassemble TRAY 50
Remove Screws K1, K2
Disassemble STAND RIM 49,
RUBBER FRONT LOCK 48
Remove Screws L1, L2, M1, M2 and
disengage all connectors on PCB
Disassemble DISPLAY PANEL PRINTED ASSY 47
Remove Screws U1, U2
Disassemble REAR LOCK ASSY 58
Note:
For re-assembling, sequence is STAND TOP fi rst, then
DISPLAY PANEL PRINTED ASSY.
Disassemble INLET COUPLING PLATE 45
Disassemble RINSE CAP ASSY 55, RINSE BUSH 54,
RINSE RUBBER 53
Remove Screws M3, M4, N1, N2
Disassemble STAND TOP ASSY 43
Remove Screw P
Disassemble FLEX ASSY COMPARTMENT 41
Remove Screws Q1, Q2
Remove Cordset clamp
Disassemble CORDSET 42
Remove Screws R1, R2
Remove Hose-cord clamp
Disassemble HOSE CORD CABLE ASSY 13
Note:
Take note of the orientation on the hose-cord clamp
Remove Screws S1, S2, S3, S4
Remove 2 x pump support plates
Remove Inox clamp at boiler inlet collar
Disengage 2 x wire connectors on PUMP ASSY 31
Disassemble PUMP ASSY 31
Remove Screws T1, T2
Remove Nut for Earth wires
Disassemble BOILER ASSY 39
GC8420
5-8