Network Connection; Troubleshooting - Epson EX5240 Quick Setup

2
Press the Menu button on the remote control, select the Network
menu, and press .
3
Choose Network Configuration and press
4
Select the Wireless LAN menu and press
5
Choose Connection Mode, press
connection to a computer, tablet, or smartphone, then press
When you're finished, press Esc to return to the Wireless LAN menu.
Note: For instructions on setting up an Advanced connection for a
connection to a router or access point, see the online User's Guide.
6
To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and IP Address Display settings
to Off.
7
When you're finished selecting settings in the Wireless LAN menu, press
Esc.
8
Select Complete and press
save your settings.
Project wirelessly from a
mobile device
You can connect your mobile device and projector using Epson iProjection
and a QR code. Make sure the wireless LAN module is installed in your
projector and the latest version of Epson iProjection is installed on your device.
Install the Epson iProjection app
To project from an iOS or Android
download and install the Epson iProjection app.
Visit epson.com/projectorapp (U.S.) or
epson.ca/projectorapp (Canada) for more information.
Direct wireless connection
Make sure your device and Epson projector are not connected to a network
and your Epson projector's Connection Mode is set to Quick.
1
iProjection on your device's Home screen.
Tap
2
Tap Projector to open the Search Projector menu.
.
.
, select Quick for a direct
, then select Yes and press
™ device,
3
Tap Read QR code.
4
Point your device's camera at the QR code your projector displays; the
QR code is read automatically.
5
Tap OK to register your projector's Wi-Fi profile.
6
Tap Install to install your projector's Wi-Fi profile.
7
Tap Install Now at the Unsigned Profile notification.
8
Tap Done to exit the Profile Installed screen.
9
Tap OK to confirm the connection to the projector.
10
Note the projector network name (SSID) shown on your device's screen.
Then go to the Wi-Fi settings on your device to select that network.
Your device and Epson projector are now connected.

Network connection

Make sure your projector and mobile device are connected to the same
network.
1
Tap iProjection on your device's Home screen.
2
Tap Projector to open the Search Projector menu.
again.
3
Tap Read QR code.
4
Point your device's camera at the QR code your projector displays; the
QR code is read automatically.
Your device and Epson projector are now connected.
again to

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
™ the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
. You may have to hold down the