video loss detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
• Video Loss State : Specify the use of video loss detection.
• Alarm Out : Select an alarm output method.
For further information on alarm output, refer to "HDD Alarm Setting". (Page 74)
`
• Alarm Duration : Specify the duration of the alarm output with the beep.
Alarm out Schedule
You can set the conditions and operating hours for scheduled alarms.
• Alarm Out : Sets the alarm output method.
For further information on alarm output, refer to "HDD Alarm Setting". (Page 74)
`
- <on> : Marked in green, and always generates alarm on scheduled time.
- <off> : Marked in black, no alarm is generated even if an event occurs.
- <event Sync> : Marked in orange, generates alarm only when an event occurs.
• Apply to All : Applies the configured schedule to all alarms.
For more information about how to set time, refer to "To set the recording schedule". (Page 75)
`
When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
`
M
English _81