Table of Contents
Advertisement
Available languages
Available languages
Repair and maintenance of the hair dryer
Cleaning method
Maintaining the hair dryer
•
Clean only after turning off the power and removing the power
cord from the power outlet.
•
Clean the housing only with a soft cloth slightly dampened
with tap water or soapy tap water. Do not use thinner,
benzine, alcohol or other chemicals.
-
Doing so may cause malfunction, cracking/discoloration of
parts etc.
Tips
Leaving the hair dryer with hair products or makeup still
adhered to the handle or body may degrade the plastic,
causing discoloration or cracking, and malfunction.
Maintaining the air outlet
•
This is the only maintenance for which the hair dryer should
be plugged into an outlet.
•
•
Use a commercially available toothbrush.
•
Switch the temperature selector to
"Cool" and blow away the dust etc.
as you scrub with the toothbrush.
•
During maintenance, do not block
the air inlet with your hands etc.
•
Be careful when using the hair
dryer for the first time after
maintenance, since it may blow
out dust etc.
Scrub to remove any dust,
hair etc. blocking the mesh.
Tips
If the mesh of the filter in the air inlet or the air outlet becomes
blocked, the hair dryer may switch frequently between hot and
cool, degrading performance and causing sparks to be seen
within the body. (These sparks do not present a hazard.)
Maintaining the nanoe™ outlet
•
Clean only after turning off the power and removing the power
cord from the power outlet.
•
Use commercially available cotton swabs. (We recommend
the thin cotton swabs made for use with babies.)
•
This maintenance allows the hair dryer to sustain the
generated level of nanoe™ over a long period.
1. Dampen the end of the cotton
swab with tap water.
. A needle portion is located
deep within the nanoe™
outlet. Using the swab, rub
this portion gently about
times.
Gently rub the tip of
the needle portion
cotton swab
nanoe™ outlet
Advertisement
Table of Contents
