Samsung HG32EC690 Installation Manual page 74

• FAQs
If SIRCH has a problem, first review this list of possible problems and solutions.
• Test SIRCH modulator controller settings:
– The SIRCH upgrade only supports OpenCable & DVB-C
– Recommended settings:
– Parameters Constellation: 64 QAM
– Remux(H/W) : Off
– SIRCH Frequency should be matched to the SIRCH Channel of the TV.
– If you change the frequency table, please refer to the frequency table in the SIRCH manual (Appendix A).
– You should set same channel in both the SIRCH PC program and on the TV. For example. if you have
an empty channel "2channel (57MHz)" in the Hotel, you should set 2channel(57MHz) for the SIRCH PC
program and the TV.
– Default initial value : SIRCH 87 (603MHz), TV SIRCH Channel : 87
74
English
[HC690-EUROPE]Install Guide-X0ENG.indd 74 2014-04-08 11:20:56