To Set Blc; To Set Wdr - Samsung SND-6083 User Manual

Hide thumbs Also See for SND-6083:
Table of Contents

Advertisement

setup screen

to Set BLc

You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1. Select <Back light>.
2. Set <mode> to <BLc>.
3. Set <BLc level>.
You can change the level to adjust the
brightness of the monitoring area.
4. Set the <top, Bottom, Left, right> levels to specify the target area.
When BLC is set, the green box is displayed on the screen for 15 seconds.
`
J
To prevent malfunction at the time of BLC setup, the vertical space of the BLC area should be over
`
40 and below 60 while the horizontal space over 30 and below 60.

to Set wDr

It displays a sharp image of the objects in a scene where both bright and dark areas exist.
1. Select <Back light>.
2. Set <mode> to <wDr>.
3. Specify the <wDr level>.
It is recommended to use WDR in the
`
J
indoor environment.
Noise may exist between the dark area and the bright area in the WDR mode.
`
If the <Back light> mode is set to <WDR>, the sensor mode cannot be set to 50 fps or 60 fps.
`
The maximum and minimum shutter values are initialized whenever you turn on or off the WDR
`
mode.
In case of SNB-6003/SNB-6004, some of the WDR functions may be restricted when the manual
`
or P-iris lens (manual) is used.
In the case of SND-6083/SND-6084, if you use a shutter in manual mode, the WDR function may
`
be partially restricted.
88_ setup screen

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Snb-6004Snb-6003Snd-6084

Table of Contents