Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Active Vision SX-1400 Series
Summary of Contents for Active Vision SX-1400 Series
- Page 1 Quick Operation Guide for SX-1400 Series NVR UD.6L0202B0042A02...
-
Page 2: Verify Contents
Please contact your dealer for damaged or missing items. NVR Pre-Installation The SX-1400 series NVR are highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the NVR. 1. Keep all liquids away from the NVR. - Page 3 Quick Operation Guide for the SX-1400 Series NVR 3. Connect the power cable to the HDD. 4. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. Steps (Alternate model): Remove the cover from the NVR by unfastening the screws on the back and side.
- Page 4 Quick Operation Guide for the SX-1400 Series NVR Connect the power cable to the HDD. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. Re-install the cover of the NVR and fasten screws.
-
Page 5: Front Panel
Quick Operation Guide SX-1400 Series NVR Front Panel ① Status Indicators (Alarm, Ready, Status, HDD, Power, Tx/Rx) ② DVD-R/W ③ Control Buttons ④ Compound Buttons ⑤ Shuttle Button ⑥ Power Button ⑦ USB interface ① USB Interface ② Status Indicators (Alarm, Ready, Status, HDD, power, Tx/Rx) ③... - Page 6 Quick Operation Guide for the SX-1400 Series NVR Status Indicator(Power, Status, Tx/Rx) ① USB Interface ②...
-
Page 7: Rear Panel
Quick Operation Guide for the SX-1400 Series NVR Rear Panel Item Description VIDEO OUT BNC connector for video output. CVBS AUDIO OUT BNC connector for audio output. This connector is synchronized with CVBS video output. VGA AUDIO OUT BNC connector for audio output. This connector is synchronized with VGA video output. - Page 8 Quick Operation Guide for the SX-1400 Series NVR Item Description VIDEO OUT BNC connector for video output. CVBS AUDIO OUT BNC connector for audio output. This connector is synchronized with CVBS video output. VGA AUDIO OUT BNC connector for audio output. This connector is synchronized with VGA video output.
- Page 9 Quick Operation Guide for the SX-1400 Series NVR Item Description VIDEO OUT BNC connector for video output. AUDIO OUT BNC connector for audio output. AUDIO IN BNC connector for audio input. (Also for voice talk) RS-232 Interface Connector for RS-232 devices.
- Page 10 Quick Operation Guide for the SX-1400 Series NVR Item Description Connector for LAN (Local Area Network). LAN Network Interface Connects to RS-485 devices. RS-485 Interface 100~240VAC power supply Power Supply Switch for turning on/off the device. Power Switch Universal Serial Bus (USB) ports for additional devices such as USB USB Interface mouse and USB Hard Disk Drive (HDD).
-
Page 11: Peripheral Connections
Quick Operation Guide for the SX-1400 Series NVR Peripheral Connections Connecting to Alarm Input / Output Device The alarm input/output interface of the NVR is shown as below: The alarm input is an open/closed relay. If the input is not an open/closed relay, follow the connection diagram... -
Page 12: Alarm Connection
Quick Operation Guide for the SX-1400 Series NVR Alarm Connection To connect alarm devices to the NVR: 1. Disconnect pluggable block from the ALARM IN /ALARM OUT terminal block. 2. Unfasten stop screws from the pluggable block, insert signal cables into slots and fasten stop screws. Ensure signal cables are in tight. -
Page 13: Specifications
Quick Operation Guide for the SX-1400 Series NVR Specifications Model IP video input 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF 1-ch, BNC (1.0 Vp-p, 75 Ω) CVBS output Resolution: 704 ×... - Page 14 Quick Operation Guide for the SX-1400 Series NVR Model IP video input 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF 1-ch, BNC (1.0 Vp-p, 75 Ω) CVBS output Resolution: 704 ×...
- Page 15 Quick Operation Guide for the SX-1400 Series NVR Model IP video input 16-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) (Two-way audio) Audio in Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF 1-ch, BNC (1.0 Vp-p, 75 Ω) CVBS output Resolution: 704 ×...
- Page 16 Quick Operation Guide for the SX-1400 Series NVR Model 4-ch, 720P 8-ch, 720P IP video input Video/Audio input Two-way audio 1-ch, RCA (2.0 Vp-p, 1kΩ) input 5MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Decoding resolution 1-ch, resolution: 1920 × 1080P /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, HDMI/VGA output 1280 ×...
-
Page 17: Hdd Storage Calculation Chart
Quick Operation Guide for the SX-1400 Series NVR HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used... -
Page 18: Menu Operation
Quick Operation Guide for the SX-1400 Series NVR Menu Operation Menu Structure The menu structure of the SX-1400 Series NVR: The alternate menu structure of the SX-1400 Series NVR:... -
Page 19: Startup And Shutdown
Quick Operation Guide for the SX-1400 Series NVR Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR: 1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. -
Page 20: Login Window
Quick Operation Guide for the SX-1400 Series NVR 2. Click Next button on the Wizard window to enter the Login window. Login Window 3. Enter the admin password. By default, the password is 12345. 4. To change the admin password, check the New Admin Password checkbox. Enter the new password and confirm the password in the given fields. -
Page 21: Network Configuration
Quick Operation Guide for the SX-1400 Series NVR Network Configuration Note: the internal NIC IPv4 address should be configured for the cameras connecting to the PoE network interface or the built-in switch of the NVR. 7. Click Next button after you configured the network parameters, which takes you to the HDD Management... - Page 22 Quick Operation Guide for the SX-1400 Series NVR HDD Management 8. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD. 9. Click Next button. You enter the Adding IP Camera interface. 10. Click Search to find online IP Camera. Select the IP camera to be added, and click the Add button.
-
Page 23: Live View
Quick Operation Guide for the SX-1400 Series NVR Record Settings 12. Click Copy to copy the settings to other channels. Copy Record Settings 13. Click OK to complete the startup Setup Wizard. Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:... -
Page 24: Adding And Configuring Ip Cameras
Quick Operation Guide for the SX-1400 Series NVR Adding and Configuring IP Cameras You should add and configure the online IP cameras to enable the live view and recording function. Adding IP Cameras You can search and add the online IP cameras by following the startup wizard, or according to the following steps. - Page 25 Quick Operation Guide for the SX-1400 Series NVR information of the IP camera to be added. Click Add to add the camera. Note: If you check the Synchronize IP Camera checkbox, the default settings of the NVR for the IP camera is applied to the added camera.
-
Page 26: Ptz Control
Quick Operation Guide for the SX-1400 Series NVR PTZ Control Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you set the PTZ camera. Before you start, please check that the PTZ and the NVR are connected properly through RS-485 interface. -
Page 27: Instant Playback By Channel
Quick Operation Guide for the SX-1400 Series NVR Description of the PTZ toolbar icons Icon Description Icon Description Icon Description Direction button and Zoom+, Focus+, Zoom-, Focus-, Iris- the auto-cycle button Iris+ The speed of the Light on/off Wiper on/off... - Page 28 Quick Operation Guide for the SX-1400 Series NVR Right-click Menu under Live View Front Panel: press PLAY button to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the top left channel (not masked) will be played back.
- Page 29 Quick Operation Guide for the SX-1400 Series NVR The channel and time selection menu will display by moving the mouse to the right of the playback interface. Just tick the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels.
- Page 30 Quick Operation Guide for the SX-1400 Series NVR Quick Export using USB1-1 Check backup result. Choose the record file in Export interface and press button to check it. Checkup of Quick Export Result Using USB1-1 0202031021126...
Need help?
Do you have a question about the SX-1400 Series and is the answer not in the manual?
Questions and answers