Metabo Hammer Catalog page 17

SDS-PLUS ACCESSORIES
Chisel with SDS-plus shank end
Chisel shape
Pointed chisel,
round tip
Pointed chisel,
square tip
Flat chisel
Scaling chisel
Chasing gouge
Mortar chisel,
carbide-tipped
Mortar chisel,
carbide-tipped
Tile chisel,
offset
Assortment of chisels with SDS-plus shank end
SDS-plus drill bit / chisel set
(5 piece)
Consisting of hammer drill bits of
Ø 6, 8, 10 mm (1 each),
1 pointed chisel (6.31421) and
1 flat chisel (6.31420)
Plastic round box
SDS-plus chisel set
(3 piece)
Comprising
1 pointed chisel (6.31421),
1 flat chisel (6.31420) and
1 scaling chisel (6.31425)
Plastic round box
SDS-plus chisel set
(5 piece)
Comprising
2 pointed chisels (6.31421),
2 flat chisels (6.31420) and
1 scaling chisel (6.31425)
Plastic round box
Chiselling attachment
In order to work without
rotary motion with the chisels
6.31420, 6.31421, 6.31422,
6.31423, 6.31424, 6.31425 and
6.31426 you must use the
chiselling attachment 6.31409.
78 |
Overall Cutting Order
length width no.
mm
250 6.30992
250 6.31421
250 20 6.31420
250 40 6.31425
250 22 6.31422
130 6.31423
200 6.31424
250 40 6.31456
Order
no.
6.30477
6.30478
6.30484
Order
no.
6.31409
Carbide core cutters, M 16 female thread
Optimised with larger carbide teeth
for longer tool life. Higher power
efficiency due to stably, thin-walled
bit bodyFor concrete and masonry
Diameter Working length
mm mm
25 55
30 55
35 55
40 55
50 55
68 55
82 55
90 55
100 55
112 55
Carbide pilot drills for core cutters
Diameter Overall length
mm mm
8 120
Anchor-head holders with
M 16 male thread
Anchor-head holder
KW 11
Overall length: 90 mm
anchor-head holder
SDS-plus
Overall length: 105 mm
anchor-head holder
SDS-plus
Overall length: 220 mm
Accessories
Connector
With 1/2"-20 UNF thread for
the connector 6.30283 for
hammer drill bits with ratio
thread and core cutters
Connector
For hammer drill bits with
ratio thread and for fitting
the core bit using the pilot
drill 6.23038
Connector
With 1/2"-20 UNF thread for
chuck and hexagon recess
1/4" (6.35 mm) for screwdriver
bits with bit retaining bush
Bit retaining bush
For fitting bits and sockets with 1/4" (6.35 mm)
hexagon in the spindle of drills and impact
drills with spindle thread 1/2"-20 UNF and
hexagon recess 1/4" (6.35 mm)
Geared chuck
Clamping width: 1,5 - 13 mm
Female thread: 1/2"-20 UNF
Key size: 2
Order
no.
6.23390
6.23391
6.23392
6.23393
6.23394
6.23395
6.23396
6.23397
6.23398
6.23399
Order
no.
6.27040
Order
no.
6.27041
6.27043
6.27042
Order
no.
6.30928
6.30283
6.31285
6.31281
6.35035