Advertisement
THIS PROCEDURE SHOULD ONLY BE PERFORMED BY AN AUTHORIzED
WARNINg: gENUINE WEBER-STEPHEN REPLACEMENT PARTS MUST BE USED FOR ANY REPAIR OR REPLACEMENT.
YOUR ACTIONS, IF YOU FAIL TO FOLLOW THIS PRODUCT WARNINg, MAY CAUSE A FIRE, AN ExPLOSION, OR
STRUCTURAL FAILURE RESULTINg IN SERIOUS PERSONAL INjURY OR DEATH AS WELL AS DAMAgE TO PROPERTY.
DANgER: BEFORE PERFORMINg ANY WORk MAkE SURE THE gAS SUPPLY IS TURNED OFF AT THE SOURCE.
FAILURE TO FOLLOW DANgERS, WARNINgS AND CAUTIONS CONTAINED IN THIS INSTRUCTION SHEET MAY CAUSE A
FIRE OR AN ExPLOSION RESULTINg IN SERIOUS PERSONAL INjURY OR DEATH AS WELL AS DAMAgE TO PROPERTY.
MAIN
IGNITER MODULE
REpLAcEMENT
BEFORE STARTINg: Make sure lid is closed and casters are
locked to prevent grill from moving.
note: Grills illustrated may have slight differences than model purchased.
WEBER-STEPHEN PRODUCTS LLC SERVICE TECHNICIAN
(Will void all Warranty protection.)
IGNITER BUTTON
MAIN IGNITER MODULE /
BUTTON / IGNITER ELECTRODE
REPLACEMENT INSTRUCTIONS
REpLAcEMENT
IGNITER ELEcTRODE
REpLAcEMENT
61623 07/18/12
AT
Advertisement
