1. Press the MIN/MAX button once to view the minimum
indoor and outdoor temperature.
2. Press the MIN/MAX button once more to view the maximum
indoor and outdoor temperature.
3. Hold the MIN/MAX button for 3 seconds to reset all MIN/MAX
temperatures.
Note: When using multiple sensors, press the CH button then the
MIN/MAX button to view the MIN/MAX reading on a different
channel
Outdoor Temperature Reception Icon/Channel Indicator
The outdoor temperature reception icon will flash every
second when searching for the sensor.
Once connected, reception icon will show for 3 seconds
once the outdoor temperature update is received.
The channel indicator will show below the outdoor
temperature.
Press the CH button to view sensors on other channels.
Note: Channel 1 will not show if only one sensor is
connected.
1. Insert batteries into sensor 1
2. Insert batteries into wireless thermometer
3. When outdoor temperature appears, insert batteries into
sensor 2
4. When channel 2 appears insert batteries into sensor 3
5. Keep wireless thermometer and all sensors together for 15
minutes.
When the TX icon is displayed replace
batteries in the outdoor sensor.
When the RX icon is displayed replace
batteries in the wireless thermometer .
WS-9160U-IT
View/Reset MIN/MAX Readings
Setup with Multiple Sensors
Low Battery Icon
www.lacrossetechnology.com/support
Outdoor
Reception
Icon
Outdoor
Channel
Icon
Low
Battery
Icons
Page | 3
2