Advertisement
To adjust hour:
with time on display, push the tune UP button adjust hour, when adjustment is
completed, release the button.
To adjust minute:
with time on display, push the tune DN button adjust minute. When adjustment is
completed, release the button.
12. MUTE BUTTON
Press this button to eliminate the sound level temporarily.
13. MO/ST BUTTON
Press it to select mono or stereo mode.(effect only for FM)
14. PRESET STATION [ 1-6 ] / 2RPT, 3INT, 4RDM.
A]. To memorize the current frequency, press any one of the six preset
buttons hold for more than 2 seconds.
B]. To recall the preset memory, press one of the preset button [1-6].
C]. REPEAT BUTTON
During CD mode. Press 2 RPT button to repeat a single track.
D]. During CD mode press 3 " INTRO "button.
It play individually tune for 10 seconds.
If this key is pressed in intro scan mode, it display " INTRO ".
E]. During CD mode press 4 " RDM " button.
If this key is pressed, and at the end of the tune random tuning function
performs.
If this key is pressed, in random play mode, it display " RDM ".
15. AS/PS [ AUTOMATIC STORE AND PRESET MEMORY] BUTTON
Press it to perform all stations memory for 5 seconds each time. While memory
digital and frequency will flash on LCD. If the button is pressed for more than 2
seconds, it will seek station on current band, then write to the preset memories
and word ART will appear on LCD. When the auto-storage operation is completed,
it will automatically perform for 5 seconds each time, during the memory station
performing, press 1-6 digital buttons to select and stop scanning function.
NOTICE: Press OPEN button to flip down the front panel from the unit.
Then insert the CD DISC to playing. When playing is completed.
Press the EJ button to eject the CD DISC. [ CD DISC was exited ]
USA
EUROPE
IMPORTANT: This radio is set to USA frequency by factory, if European
frequency is required please flip the frequency step switch
on the side of the unit.
5
DISC PLAY:
Cleaning discs
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE:
. Do not use so solvents such as benzine, thinners. Commercially available
cleaners or anti static spray damage the unit.
Insert a disc with the label surface down. Doing so may damage the unit.
NOTE:
. Do not try to insert another disc when one has been already inserted.
Doing so may damage the unit.
.Handle the disc by its edge. And to keep the disc clean, do not touch
the surface.
.Do not stick paper or tape on the disc.
.Do not expose the disc to direct sunlight or heat sources such as hot air
ducts. Or leave it in a car parked in direct sunlight where there can be a
considerable rise in temperature.
Label
surface up
6
Advertisement
