More Tuning Manually And Defining Preset Stations (Am/Fm Band) - Meridian Stereo System User Manual

More Tuning manually and defining preset stations (AM/FM band)
This section gives information about using the AM/FM band to tune
manually to a specific frequency, and define preset stations. You
can store up to 30 preset stations each with a name of your choice,
and then select them directly from the front panel or MSR+.
FM
îïñStepôö
Step / Store
V A
To tune manually To define a preset
station
• Press Step V or A.
• Tune to the station you
This steps through the
want to store.
frequencies in steps of
0.1MHz on the FM band,
• Press Store.
and steps of 10kHz (AM,
The display shows:
USA), 9kHz (MW), and
1kHz (LW).
���� �������
• Press ] to show the
first unused preset
label:
��������
To select a different
preset press [ or ].
• Press Store to store
the preset station.
The display shows:
•
����� ���
Store
To edit the label
After storing a preset
station the display
shows:
����� ������
• Press Store to edit
the label or Return to
exit.
If you selected Store:
• Use V or A to change
the flashing character,
and < or > to move
between characters:
��� ���
• Press Store to store
the label.
The display shows:
������
������
Press More to display the soft keys for tuning manually and
defining preset stations.
Clear
Clear
To clear the current
preset station
• Press Clear.
U s i n g t h e
r a d i o t u n e r
3
Audio
Audio
To change the audio
setting
• Press Audio.
You can select between
the following settings:
G01/G51
FM: Mono or Stereo.
G68/G91
FM: Stereo, Wide,
Medium, Narrow,
or Mono. Wide,
Medium, and Narrow
progressively reduce the
stereo width to reduce
hiss on noisy stations.
AM: Low Pass, Whistle,
or Filter Off. Low Pass
removes excess hiss, and
Whistle removes 4.5kHz
whistle.
1 9