Operating Your G Series System; Soft Keys - Meridian Stereo System User Manual

6

Operating your G Series system

B a s i c u s e
This section gives information about switching your G Series system
on and off, using the soft keys, and changing the display format.
The five soft keys under the display make the G Series products
particularly easy to use. They change to reflect what the product is
doing. For example, if you are playing a CD they provide Play, Stop,
Pause, Previous, and Next commands. The current function of each
key is shown above the key on the bottom line of the display.
On/Off
To switch on from
standby
• Press On/Off.
Alternatively select a
source using the MSR+.
To switch to standby
• Press On/Off or OFF
on the MSR+.
Display Home
To change the To display the Home
display format

soft keys

• Press Display. • Press Home.
The display will step Products which
through a series of combine two or more
alternative display functions, eg tuner and
formats, depending preamplifier, provide a
on what is currently set of Home soft keys
playing. appropriate to each
function.
To blank the display
• Press Home to
• Press Display until
switch between the
you reach the blank
alternative sets of
display option.
Home soft keys.
Blanking the display
also switches off all the
display circuitry.
This initial set of soft keys is called Home. You can get back to it at
any time by pressing Home, to the left of the soft keys.
You can display additional, less frequently needed commands by
pressing More to the right of the soft keys. The more complex
products have several sets of soft keys and pressing More steps
between the sets.
Home More
Soft keys
To select a command
• Press More until the
command you want is
displayed above the
soft keys.
• Press the soft key
corresponding to the
command.
If you do not select a
command after a few
seconds, the soft keys
revert to the Home soft
keys.
More
To access more soft
key commands
• Press More.
An example is the
brightness command.
To change the display
brightness
• Press More until the
display shows
–Bright+.
• Press –Bright or
Bright+ to decrease
or increase the display
brightness.
• Press Home to return
to the Home soft keys.