Installing The Hard Disks - Asus A7V133 User Manual

5. SOFTWARE SETUP

5.4.2 Installing the Hard Disks

The RAID 0 system allows users to configure two new hard disks with the same
new OS simultaneously.
1. Install the first and second hard disk into the hard disk bays of your system.
Connect each hard disk drive with a separate UltraDMA/100 cable, one to the
Primary ATA/100 IDE connector and the other to the Secondary ATA/100 IDE
connector onboard the A7V133.
2. Ensure that ATA/100 / RAID 0 jumpers 13 and 14 are both covered: [2-3]
(See: Section 3.4.5, Hardware Setup: Motherboard Settings)
3. Connect the power cables to the hard disks.
5.4.3 Creating the RAID 0 Array
1. Boot-up your computer. If this is the first time you have booted with two hard
disks correctly installed, then the Promise
2 Press <Ctrl-F> keys to display the FastBuild™ Utility Main Menu:
.
ASUS A7V133 User's Manual
BIOS displays this screen:
®
87