Honda 2003 Accord Owner's Manual page 323

Replacing a High-mount Brake
Light Bulb
BULB
SOCKET
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Remove the burned-out bulb by
2.
pulling it straight out of the socket.
3. Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Replacing a Rear License Plate
Bulb
1. Remove the license light assembly
by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out.
LENS
LENS
2. Remove the lens from the bulb
holder by pulling the lens while
squeezing the tabs on both sides
of the holder.
Lights
HOLDER
BULB
CONTINUED
319
Maintenance