Honda 2003 Accord Owner's Manual page 320

Lights
5. Remove the burned out bulb from
the socket by pushing it in and
turning the bulb counterclockwise
until it unlocks.
6. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
7. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
8.
new bulb is working.
9. Put the inner fender cover in place.
Install the holding clips. Lock each
one in place by pushing on the
center.
316
Maintenance