Meridian 3100 Installation And User Manual page 6

Connecting two 3100 loudspeakers to a
Meridian CD Player, Control Unit, or other
digital source
You can create a complete system by connecting a pair of 3100 loudspeakers directly
to a digital source. The 3100 loudspeakers include volume, balance, and tone
controls allowing you to control the system using an MSR+ (not provided).
Because the 3100 speakers are preconfi gured for use in a two-channel system, no
further confi guration is necessary.
• Connect the DIGITAL OUTPUT and a COMMS socket from the Meridian source or
control unit to DIGITAL INPUT 1 and the COMMS input on the DSP loudspeaker
labelled Left Master, using the M5 lead supplied.
• Connect the DIGITAL and COMMS outputs from the master DSP loudspeaker to
DIGITAL INPUT 1 and the COMMS input on ther DSP loudspeaker labelled Right
Slave, using the S5 lead supplied.
You can connect another digital source to DIGITAL INPUT 2, and then confi gure the
appropriate source selection key on the remote to select that input.