Table of Contents
Advertisement
Clean your electric kettle before first use
1. Wash the inside of the kettle and lid with mild detergent and water.
Rinse each thoroughly. Do not immerse the kettle or power base in
water or any other liquid. These items are not dishwasher safe.
2. Fill the electric kettle with fresh water to the "MAX" water level
mark on water window. Boil the water, following the directions below
for use of your kettle.
3. When the water and unit have cooled, discard the water. Rinse with
cold water and repeat.
4. Your electric kettle is now ready for use.
Using your Variable Temperature Electric Kettle
1. With this appliance you can boil water or you can heat it up to a
certain temperature between 40˚C and 95˚C (in increments of 5˚).
2. Boiling: Fill the jug with the desired amount of water, making
sure that the water level is between the minimum and maximum
indication of the level indicator.
3. Place the jug on its base and plug in the appliance.
4. Press the ON/OFF switch
display. After a few seconds, the indication stops flashing and the
kettle starts operating. As soon as the water boils, the appliance
automatically switches off. A beep sounds. The current temperature
of the water is displayed.
NOTE: The display of the kettle stays on until you take the kettle out
of the base or you turn it off with the ON/OFF switch.
Variable Temperature Setting
1. You can set the desired temperature with the display keys.
2. Fill the jug with the desired amount of water, making sure that the
water level is between the minimum and maximum indication of the
water level indicator.
3. Place the jug on its base and plug in the appliance.
4. Press the ON/OFF switch
display. You can select a temperature between 40˚C and 95˚C (in
increments of 5˚) with the "+" and "-" keys. As long as the display
flashes, you can change the temperature.
5. If the temperature is set and you wish to change it anyway, you will
have to turn off the appliance and switch it back on.
6. As soon as the desired temperature is reached, the appliance
automatically switches off. A beep sounds. The current temperature
of the water is displayed.
: the temperature "100" flashes on the
: the temperature "100" flashes on the
5
Advertisement
Table of Contents
