Fitting Instructions - Meridian DSP420 Installation & Operation Manual
Meridian america inc. digital signal processing in-wall loudspeaker system, analog active in-wall speaker system installtion and operation dsp420, m420
Hide thumbs
Also See for DSP420:
- User manual (43 pages) ,
- General information (2 pages) ,
- Installation & operation (2 pages)
Advertisement
DSP420
Digital Signal Processing
In-Wall Loudspeaker System
INSTALLATION & OPERATION
❶
❺
Step 5: Tidy and clamp all cables. Fit
covers to power and audio boxes.
M420
Analogue Active In-Wall
Loudspeaker System
Fitting Instructions
See separate sheet for important safety
instructions! Illustrations are not all to the
same scale.
Step 1: Use the template (provided
as part of the packaging) to mark wall
for cut-out (far left). Position equally
between battens. Use this alternative
method (left) to mark battens prior to
wall covering.
❷
Step 2: Ensure that 12in (300mm) of
each cable is present in the wall cut-
out.
❻
Step 6: Carefully connect power and
audio between loudspeaker unit and
back box. An IEC connector is used
for power; XLR for analogue; DSUB
for digital audio. Be sure to install the
digital cable with the choke on the
end next to the speaker.
Analogue
Digital
Advertisement
