6 If two DDR3L SDRAMs are already installed in the memory slot, remove
7 Align the notch of the DDR3L SDRAM with the protrusion of the socket
8 Push the DDR3L SDRAM inward toward the socket until the latches on
9 After aligning the attachment clips with their matching gaps, reinstall the
0 Reinstall and tighten the screws.
A Reinstall the battery.
B Turn the computer over again.
C Connect the AC power adapter and the cables to the computer again.
Downloaded from
www.Manualslib.com
one of them to make room for the new one by pressing out on the latches
on both edges of the socket at the same time. Be sure to save the old
DDR3L SDRAM for future use.
a
and gently insert the DDR3L SDRAM into the socket at a 30-45° angle.
both edges of the socket are pushed into the closed position.
b
compartment cover.
manuals search engine
Appendix. CRU instructions
b
a
a
39