Description Of The Appliance; Temperature Control - Magic Chef MCWC50DBTC User Manual

Description of the appliance

Engaged wine racks
There are five wine racks
.
of full depth on upper part
of the cabinet to store
wine bottles.
The second supporting
.
guide (counted from
top, see illustration
marked "A") is not
suitable for wine racks.
All the top five wine racks have tabs to engage the
.
cabinet on both sides.
Any of the wine racks can be removed to store
.
larger bottles.
To remove a rack:
1. Remove all bottles from the rack.
2. Lift the rack upwards and then pull out.
To replace, put the sides of the rack back onto the
supporting guides of the cabinet and push back
until the rack tabs snap into place.
Temperature Control and Display
The temperature range of the wine cooler is intended
.
for 39°F to 64°F (+/- 5°F ).
Average temperature for red wine is 54°F to 61°F.
.
Average temperature for white wine is 43°F to 50°F.
.
The display usually shows the average temperature
.
of the appliance at that moment.
PRESET WINE ZONES:
Press the [Red] or [White] pads to choose preset
storage conditions for Red or White Wine. (The
indicator 'RED' or 'WHITE' will light accordingly.) The
programmed Temperature for red or white wine will
be displayed for a few seconds.
MANUAL TEMPERATURE SETTING:
The temperature of the wine cooler can be set
anywhere between 39°F to 64°F by the temperature
Note: Make sure the tabs on the rack are well
engaged in place before loading any bottles.
Bottle arrangement
The top five racks each
.
holds 8 bottles with the
necks alternating front
to back.
The bottom rack consists
.
of two stories, each of
which holds 6 bottles with
the necks facing the front.
Interior Light
The appliance has an
interior light (E12 socket,
max. 15W) for easy interior visibility.
WE RESERVE THE RIGHT TO ALTER THE
SPECIFICATIONS WITH NO EFFECT ON
THE OPERATION OF THE APPLIANCE.
up ▲ and temperature down ▼pads as follows:
(1) Press the [SET] pad until you hear a "beep"
sound (approximately 2
(2) Press the ▲▼ pads to increase or decrease
the desired temperature in increments of one degree.
(3) Press the [SET] pad to confirm your choice -
pad is pressed within 10 seconds your choice will be
automatically confirmed.
NOTE:
The temperature display can be changed between
.
Celsius and Fahrenheit by pressing and holding
the ▲ pad for approximately
The indicator indicates status of the refrigeration
.
cycle as follows:
(1) It remains ON during the refrigeration cycle;
(2) It remains OFF during the idle cycle.
To switch the interior light on/off, simply press the
.
[Light] pad.
To switch the Appliance on/off, simply press and
.
hold [White] pad for approximately 2 seconds.
4
seconds).
if no
2 seconds.