Table of Contents
Advertisement
13.
Select the "Address", then input the "0x7ffff", and press the "OK".
14.
Press the "Load Bin -> Flash".
The following window will appear, then writing will start. After the finishing of the writing, window will close.
15.
Finish the writing, unplug the AC cord, and remove the MICON PROGRAM JIG KIT 25-4 (JG203).
16.
Insert the AC cord again, turn on the power.
17.
Press both VOL. DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
18.
Confirm that displayed version agreement with writing.
UPDATE FOR VCTP SOFTWARE
C-11
Hide quick links:
Advertisement
Table of Contents
