Summary of Contents for Pet Gear EASY STEP 4 PG9740
Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL EASY STEP 4 PG9740 To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
Page 2
INSTRUCTIONS Step 1 With rubber grippers on the bottom, place right panel part (B) on floor with PET GEAR Logo facing the floor and insert Part (E). Keep the STRAIGHT EDGE toward the back and rug facing the top. Make sure there is no gap Make sure rubber between parts after inserting.
Page 3
INSTRUCTIONS Step 3 Step 4 Insert bottom step part (F). Note the CURVED Insert another part (C). Make sure there is no gap SIDE direction. Make sure there is no gap between parts after inserting. between parts after inserting. Curved Side Step 5 Repeat Steps 3 and 4.
Page 4
Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death. REPLACEMENT PARTS Please have your model number ready before calling. Use only Pet Gear replacement parts. PO Box 99 West Rutland, VT 05777 877-752-9123 www.petgearinc.com...