Customising Using Type - Meridian 562 User Manual

Customising using Type

For an overview
of Type, see
page 13.
A full customising process
A full customising process will generally involve using all the configuring
modes of 562. A full procedure is as follows.
1. Change to Type and select the configuration closest to your
requirements.
2. Change to Config and make choices about:
keys, displays, inputs.
control options
3. Change to Gain and make choices about:
analogue input sensitivity.
4. Change back to Normal.
Making changes to an existing setup
Config and Gain are configuration editing modes, they do not reset on
entry. Type however performs a full reset of all parameters.
To make any changes to your custom configuration:
1. Change to Config or Gain – whichever is appropriate,
2. make the changes you want,
3. change back to Normal.
Type is a mode used specifically to setup 562 into one of nine factory-
preset configurations. Type resets the following for all six Types.
Balance to central.
Depending on the Type selected, the communications settings will be
as follows:
Type Mode
1 500
2 200
3 500
4 500
5 500
6 500
7 500
8 500
9 200
Customise 562 using Type
DAC ? Sources
N 12
N 8
N 6
N 8
V 1
12
V 1
8
T 1
12
T 1
8
N 8
16
CD ?
–
Y
–
–
–
–
–
–
N
562 User Guide