Replacing License Plate Lamp Bulbs; Replacing Foglamp Bulbs - Mercury Montego 2007s Owner's Manual

Lights

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position, then remove
the two screws and the license plate
lamp assembly.
2. Remove bulb socket by turning
counterclockwise.
3. Carefully pull the bulb out from
the socket.
Install new bulb(s) in reverse order.

Replacing foglamp bulbs

1. Make sure the foglamp switch is
in the OFF position.
2. Remove the bulb socket from the
foglamp by turning
counterclockwise.
3. Disconnect the electrical
connector.
Install the new bulb in reverse order.
60
2007 Montego (mgo)
Owners Guide (post-2002-fmt)
USA (fus)