Download Print this page

Toyota 4runner 2014 Owner's Manual page 314

Hide thumbs Also See for 4runner 2014:

Advertisement

338
5-4. Other interior features
Circling calibration
If "•" appears on the left side of
the direction display, circling
calibration needs to be per-
formed.
1
Stop the vehicle in a place where it is safe to drive in a circle.
2
In deviation calibration mode
(→P. 337), press and hold
the "MODE/
change to circling calibration
mode.
"•" on the left side of the direc-
tion display will blink.
3
Drive the vehicle in a circle
completing at least one full
circle within 20 - 120 sec-
onds.
If there is not enough space to
drive in a circle, drive around the
block until a direction is dis-
played.
4
Press and hold the "SET/
to exit circling calibration mode. (If the button is pressed for sev-
eral minutes, the direction will automatically be confirmed and
the display returned to normal.)
5
Make sure that "•" on the left side of the direction display has
gone off. If "•" is illuminated, perform the above procedure again.
4RUNNER (U)_(OM35A83U)
" button to
" button to confirm the direction and
I n f o r ma t i o n P r o v i d e d b y :

Advertisement

loading