Samsung galaxy note 10.1 User Manual page 118

Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available
Wi-Fi connections, then displays them on screen.
1. From the Home screen, touch
Settings.
2. Touch and slide the Wi-Fi
turn Wi-Fi On.
3. Your device automatically scans for available Wireless
Access Points.
4. When the scan is complete, touch a Wi-Fi network to
connect. If the Wi-Fi network is open, your device
automatically connects. If the Wi-Fi network is
secured, enter the password at the prompt to connect.
Apps
slider to the right to
Adding a Wi-Fi Network Manually
1. From the Home screen, touch
Settings.
2. Touch and slide the Wi-Fi
turn Wi-Fi On.
3. Touch Add Wi-Fi network, then enter network
information:
• Network SSID: Enter the name of the Wi-Fi Wireless Access
Point (WAP).
• Security: Select the type of security used by the WAP.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
• Password: If the WAP is secured, enter the password or hex
key.
4. Touch Save to save the settings, or touch Connect to
save the settings and connect to the network.
Apps
slider to the right to
Connections 111