Care And Maintenance; Applied Standards - Harbor Freight Tools 62220 Owner's Manual & Safety Instructions

1. Clean the device and wrist cuff carefully only with a slightly moistened cloth.
2. Do not immerse the device in water. It may cause damage if water enters.
3. Do not use any gas, strong detergent, or solvents to clean the device, including the wrist cuff.
4. Use a soft, dry cloth to clean your monitor.
5. Do not store in direct sunlight, dust or excessive humidity.
6. Avoid extreme temperatures.
7. Do not disassemble the monitor or cuff.
8. Remove batteries if the monitor will not be used for an extensive period of time.
This product conforms to the provisions of the EC directive MDD (93/42/EEC). The following standards apply to design and/or manufacture of
the products:
‧EN 1060-1
Non-invasive sphygmomanometers-Part1 : General requirements
‧EN 1060-3
Non-invasive sphygmomanometers-Part 3 : Supplementary requirements for electro-Mechanical blood pressure measuring system
‧EN 1060-4
Non-invasive sphygmomanometers - Part 4: Test procedures to determine the overall system accuracy of automated non-invasive
sphygmomanometers
‧ANSI/AAMI Sp10
Electronic or automated sphygmomanometers
．ISO 14971
Medical devices-Application of risk management to medical devices. The Classification according to IEC/EN 60601-1 sub-claues 5:
．Internally powered equipment
．IPX0
．Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide
．Continuous operation

Care and Maintenance

Applied Standards

18