Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no
number). Keep this manual and the receipt in a safe and dry place for future reference.
AUTOMATIC WRIST
BLOOD PRESSURE
MONITOR
When unpacking, make sure
that the product is intact and
undamaged. If any parts are
missing or broken, please
call 1-888-866-5797
as soon as possible.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Keep this manual for the safety warnings and precautions, assembly,
ITEM 62220
REV 14e
Read this material
before using this
product. Failure to
do so can result in
serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Summary of Contents for Harbor Freight Tools 62220
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. AUTOMATIC WRIST ITEM 62220 BLOOD PRESSURE MONITOR...
-
Page 2: Table Of Contents
Index Intended Use Important Information Before Use Blood Pressure Monitor Features Description of LCD Display Battery Installation Setting the Date and Time Applying Your Cuff Measurement of Pulse Rate and Blood Pressure Irregular Heartbeat Detector World Health Organization (WHO) Memory Function Troubleshooting Error Codes Care and Maintenance... -
Page 3: Intended Use
Intended Use BPM18 Series Blood Pressure Monitor applies the Oscillometric method to measure human systolic/diastolic blood pressure and heart rate. All values are shown on the LCD monitor. This device is designed only for adults. -
Page 4: Important Information Before Use
Important Information Before Use When using this product, please be sure to follow all the notes listed below. Any action against these notices may cause injury or affect the accuracy. 1. WARNING – Do not modify this equipment without authorization of the manufacturer. - Page 5 Important Information Before Use 10.Wait a minimum of 15 minutes between readings to allow for the blood vessels to return to normal. The wait time may vary depending on your individual physiological characteristics. 11.Although such cases are rare, for those with an extremely weak pulse or irregular pulse, errors may result which prevent proper measurement.
-
Page 6: Blood Pressure Monitor Features
Blood Pressure Monitor Features LCD Display START/POWER MEMORY Recall Button (on/off) Button Wrist Cuff Storage Case... -
Page 7: Description Of Lcd Display
Description of LCD Display Date Time Low Battery Symbol Systolic Pressure WHO Indicator Inflation Symbol Diastolic Pressure Average Measurement Symbol Deflation Symbol Memory Symbol Pulse Rate Memory Sets Heartbeat Symbol Irregular Heart Beat Symbol... -
Page 8: Battery Installation
Battery Installation Low battery warning: It is necessary to replace the batteries when the Low Battery symbol “ ” appears on the display, or when the display does not turn on after the POWER button is pressed. Replacing the Battery: 1. - Page 9 Battery Installation Battery-operated 1. Always use NEW batteries; never mix old and new batteries. 2. Do not use rechargeable batteries; rechargeable batteries can vary greatly in quality and strength. Use of rechargeable batteries may affect the performance of this device. 3.
-
Page 10: Setting The Date And Time
Setting the Date and Time It is necessary to set the date and time for the unit every time batteries are initially installed or replaced. 1. After replacing batteries, the “Year” will begin to flash on the display. 2. Press the “MEMORY” button to advance the display to the desired “Year”, press “POWER”... -
Page 11: Applying Your Cuff
Applying Your Cuff It is important to avoid smoking, eating, taking medication, alcohol consumption or physical activity 30 minutes prior to taking a reading. If for any reason you are unable to or should not use your left wrist, please modify the instructions for cuff application to your right wrist. Your physician can help you identify which wrist is best for you to take measurements from. -
Page 12: Measurement Of Pulse Rate And Blood Pressure
Measurement of Pulse Rate and Blood Pressure Please read the preceding portions of this manual prior to taking your first reading. 1. Rest your elbow on a solid surface with your palm facing upward. Elevate your wrist so that the cuff is at the same level as your heart. Relax your left hand. 2. - Page 13 Measurement of Pulse Rate and Blood Pressure 7. To detect the heartbeat, the heartbeat symbol will appear and continuous flashes on the LCD display. 8. Your blood pressure measurement and pulse will display simultaneously on the screen. 9. The Hypertension Indicator will indicate your reading range on the display separately.
-
Page 14: Irregular Heartbeat Detector
Irregular Heartbeat Detector 1. Your digital blood pressure monitor features an Irregular Heartbeat Detector. Irregular Heartbeats may influence the results of the measurement. If the monitor detects the Irregular Heartbeats during measurement, the symbol “ ” will appear on the display with the measurement values. -
Page 15: World Health Organization (Who)
World Health Organization (WHO) This unit features our unique Hypertension Indicator. The World Health Organization has established globally accepted standards for the assessment of high or low blood pressure readings. The below chart should be considered only as a guideline, always consult with your physician or health care professional to interpret your individual results. -
Page 16: Memory Function
Memory Function Recalling Measurements in Memory: You can recall up to 90 total measurements in memory, plus an average of the last 3 stored measurements in memory to share with your physician or trained healthcare professional. 1. Press and release the “MEMORY” button. The unit will first display the average of the last 3 stored measurements. - Page 17 Memory Function Clearing Measurements from Memory: From power display off, press and hold down the “MEMORY” button until the display shows CLr. This indicates that all measurements have been erased.
-
Page 18: Troubleshooting
Troubleshooting Problem Probable Cause Recommended Action Batteries are drained. Replace all batteries with new ones. Nothing appears in the display even when the Battery are not correctly aligned with terminals. Reinsert batteries in the correct position. power is turned on. Batteries are drained. -
Page 19: Error Codes
Error Codes Meaning Corrective Action Code Err 0 No pulse or detect pulses not enough. Take off heavy clothes and retry again. The wrist cuff is not fastened properly. Re- Err 1 Leakage in Cuff Pressure/Inflation too low. apply the cuff, and take a measurement again. Err 2 Pressure fault. -
Page 20: Care And Maintenance
Care and Maintenance 1. Clean the device and wrist cuff carefully only with a slightly moistened cloth. 2. Do not immerse the device in water. It may cause damage if water enters. 3. Do not use any gas, strong detergent, or solvents to clean the device, including the wrist cuff. 4. -
Page 21: Technical Specification
Technical Specification • Measuring range : Blood Pressure : 30~280 mmHg Pulse Rate : 40~199 beats/min • Calibration Accuracy : Blood Pressure : ± 3 mmHg Pulse rate : ± 4% of reading • Operating environment : 40℃ 10 C~40 C (50 F~104 F) 10℃... -
Page 22: Emc Tables
EMC Tables Guidance and manufacturer's declaration-electromagnetic emissions The BPM18 Wrist Type Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the BPM18 Wrist Type Blood Pressure Monitor should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment guidance... - Page 23 EMC Tables Guidance and manufacturer's declaration-electromagnetic immunity The BPM18 Wrist Type Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the BPM18 Wrist Type Blood Pressure Monitor should assure that it is used in such an environment. Immunity test IEC 60601 Compliance Electromagnetic...
- Page 24 EMC Tables Guidance and manufacturer's declaration-electromagnetic immunity The BPM18 Wrist Type Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the BPM18 Wrist Type Blood Pressure Monitor should assure that it is used in such an environment. Immunity test IEC 60601 Compliance...
- Page 25 EMC Tables Recommended separation distances between portable and mobile RF communications equipment and the BPM18 Wrist Type Blood Pressure Monitor The BPM18 Wrist Type Blood Pressure Monitor is intended fo use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the BPM18 Wrist Type Blood Pressure Monitor can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the BPM18 Wrist Type Blood Pressure Monitor as recommended below, according to the maximum output power of the communications equipment.
- Page 26 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 27 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.