Seats; Removing And Installing Head Restraints - Mercedes-Benz SLK 230 User Manual

Seats

Information on seat adjustment can be
found in the "Getting started" section
( page 27).
Removing and installing head
restraints
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
SLK 32 AMG has integrated,
non-removable head restraints.
G
1 Release button
Removing head restraint
Open the retractable hardtop
( page 130).
Pull head restraint to its highest
position.
Push button 1 and pull out head re-
straint.
Controls in detail
Installing head restraint
Warning!
Be sure to install the head restraint so that
it is facing in the right direction. Otherwise
you could damage the mounting.
In addition, a head restraint installed in the
wrong direction will not provide the intend-
ed protection and can cause injury in an ac-
cident or similar situation.
Insert head restraint and push it down
to the stop.
Push button 1 and adjust head re-
straint to desired position.
Seats
G
81