Table of Contents
Advertisement
A
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with the
Technical information
Technical data
Dimensions of the recess
Height
Width
Depth
Voltage
Frequency
The technical information are situated in the
rating plate, on the external or internal side of
the appliance and in the energy label.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
the packaging in applicable containers to
10
B
C
D
E
mm
mm
mm
Volts
Hz
. Put
letter "E" or by the earth symbol
coloured green and yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter "N" or
coloured black.
3. Connect the wire coloured brown to the
terminal either marked with the "L" or
coloured red.
4. Check that no cut, or stray strands of wire is
present and the cord clamp (E) is secure
over the outer sheath.
Make sure the electricity supply voltage is
the same as that indicated on the appliance
rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse
(B). In the event of having to change the fuse in
the plug supplied, a 13 amp ASTA approved
(BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp
socket is a serious safety (shock)
hazard. Ensure that it is disposed of
safely.
815
596
550
230 - 240
50
recycle it. Help protect the environment and
human health and to recycle waste of electrical
or
www.zanussi.com
Advertisement
Table of Contents
