Connect The Cable - LG AKWW0243AA0 Installation Manual

Installation

Connect the cable

Connect the cable to the unit by connecting the wires to the terminals on the control board
individually according to the unit connection.
The earth wire should be longer than the common wires.
The circuit diagram is not subject to change without notice.
When installing, refer to the wiring diagram behind the panel front of Unit.
CAUTION:
• The diagram is not subject to change without notice.
• Be sure to connect wires according to the wiring diagram.
• Connect the wires firmly, so that not to be pulled out easily.
• Connect the wires according to color codes by referring the wiring diagram.
CAUTION: The power cord connected to the unit should be complied with the
following specifications.
Model
AKWW0243YA0
AKWW0183YA0
AKWW0123YA0
AKWW0093YA0
RECOMMAND: Provide a circuit
breaker between power source
and the unit as shown below.
RECOMMAND: The power cord connected to the unit should be complied with
the following specifications (ETL recognized and CSA certified).
AKWW0123YA0
AKWW0093YA0
Line voltage (208~230V)
The power connecting cable connected to the indoor and outdoor unit should be
complied with the following specifications (ETL recognized and CSA certified).
RECOMMAND: When using the separate wire as the power cord, please fix the
separate wire into the control box panel by using tie wrap as the fixture.
16 Water Cooled Package
(inch )
Min.Thickness 2
Main/Earth
AWG
0.005/0.005 12
0.005/0.005 12
0.003/0.003 14
0.003/0.003 14
AWG14
Low voltage (below 40V)
Circuit breaker Leak current circuit breaker
(NFB)
25A
20A
15A
15A
Main power source
Air
Conditioner
AKWW0183YA0
AWG12 (Allowable temperature
to the wire rated at least 90C˚)
AKWW0243YA0
Line voltage (208~230V)
AWG18
(ELB)
25A 100mmA 0.1sec
20A 100mmA 0.1sec
15A 100mmA 0.1sec
15A 100mmA 0.1sec
Circuit Breaker
Use a circuit breaker
or time delay fuse.