Table of Contents
Advertisement
Windows 2000 OS: Make Windows XP installation steps (1 – 9)
3.3. Installation of "T-Modem Control Tool"
1. The
installation
automatically. If it is not the case, so find a catalogue
"Software" in the CD and start "setup.exe" file. The
first "T-Modem Setup" dialog box will be opened;
2. Press "Next" button in the opened box. A second
"T-Modem Setup" dialog box will appear;
4. "T-Modem Setup" dialog box will appear. Press
"Next" in the opened dialog box;
6. "T-Modem Setup" dialog box will appear. Enter
dial-up settings in the
settings are automatically read from a "*ini" file on
the CD. Should the parameter fields appear empty
the user has to fill in them by him self. He can
obtain the dial-up settings by his GSM operator.
The settings being filled in the "Next" button must
be clicked;
program
should
5. "T-Modem Setup" dialog box will appear.
Press "Install" in the opened dialog;
d
ialog box. The dial-up
start
3.
You
can
select
installation way in the dialog box. When
"Typical" installation is chosen, a standard driver
will be installed. When "Custom" installation is
chosen,
you
can
components and show the driver installation
folder. When "Complete" installation is selected,
a complete driver installation will take place. It is
recommended to select a "Custom" installation.
The third "T-Modem Setup" dialog box will be
opened;
a
preferable
driver
install
separate
driver
10
Advertisement
Table of Contents
