Mercedes-Benz 2010 GLK-Class Operator's Manual page 130

Audio system
128
Tuning to a station via station search
F
( Y page 138)
Fast rewind (
Skipping backwards to a track
( Y page 153)
Confirming a passcode
G
( Y page 159)
Accepting a call (
Initiating a call (
Redial ( Y
Rejecting a call (
H
Ending an active call (
Opening system settings menu
I
( Y page 135)
Switching sound on/off
J
( Y page 133)
Switching hands-free microphone
on/off (
Switching to telephone mode
K
( Y page 155)
Sound settings (
L
Audio display
! Avoid touching the audio display at all
times. The display has a very sensitive high-
gloss surface, there is a risk of it being
scratched. Do not press directly in the
display face. Otherwise, the audio display
will be damaged.
i
For information about cleaning and care
of the audio display, see "Audio or
COMAND display" (
Display
The currently selected mode and the
associated menus are shown on the audio
display. The audio display is divided into
several areas.
Y page 153)
Y page 167)
Y
page 165)
page 166)
Y page 167)
Y page 167)
Y page 167)
Y page 133)
Y
page 256).
Example illustration: Radio selected
Status line = displays the time and the
current settings for radio and telephone
mode.
You can request the required function using
menu bar :.
The selection is made using the audio
controller.
Mobile phone readiness is indicated by
additional information being shown in the
status line:
In the telephone main menu: Name of the
R
®
Bluetooth device (calls made and
received via the Bluetooth
( Y page 160).
Mobile phone network signal strength
R
r. This information will only be shown
with suitable mobile phones.
The receiver symbol indicates whether a
R
call is active or not.
¢ No active call
ö Active call
In this example, the audio main function is set
to the FM radio mode and main area ; is
active.
i
The layout of the menus may vary
depending on your vehicle's equipment.
This manual shows the menus for a fully
equipped vehicle.
Instrument cluster multifunction
display
Please refer to the "Control system" section
of this manual ( Y page 110) for function
descriptions and operation of the instrument
cluster multifunction display and
®
interface)