Table of Contents
Advertisement
4.4.6 PTZ setup
【Channel】Choose the dome camera input channel.
【Protocol】Choose the corresponding dome protocol. (PELCOD as an example)
【Address】Set as the corresponding dome address. Default: 1.（Note：The address must be
consistent with the dome address.）
【Baudrate】 Choose the corresponding dome baud rate length. You can control the PTZ and vidicion.
Default: 115200.
【Data bits】Include 5-8 options. Default: 8.
【Stop bits】Include 2 options. Default: 1.
【Parity】Include odd check, even check, sign check, blank check. Default: void.
4.4.7 RS232 setup
Picture 4.29 PTZ setup
Page 50
Advertisement
Table of Contents
