The System - Bose Solo 15/10 series II Important Safety Instructions Manual

Option2
This figure shows two source connections using a coaxial cable
and analog cable.
Audio OUT
Source 1
System connector panel
Using two sources connected to the system
Power off sources when not in use. In order for one source to
deliver audio to the system, your other source must be off.
AudioOUT
Source2
Connecting a TV headphones connector to

the system

If your TV only has a headphones connector, use a 3.5 mm to RCA
stereo cable (not provided) to connect to the system.
1. Insert the stereo plug into the TV headphones connector.
2. Insert the red plug into the R connector on the system.
3. Insert the white plug into the L connector on the system.
4. Ensure your TV speakers are on. Refer to your TV's owner's
guide for more information.
5. To ensure optimal volume control from the system,
• Set your TV's volume to 75 percent of maximum.
• Next, set the volume level of the system using the
remote control.
Audio OUT
TV headphones connector panel
(or other variable audio output)
System connector panel
Alternate Setup
3.5 mm Stereo cable
(not provided)
English - 17