Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nagel FOLDNAK 4
Summary of Contents for Nagel FOLDNAK 4
- Page 1 FOLDNAK 4 / 6 / 8 User Manual English...
-
Page 2: Table Of Contents
6.5.8 Stapling 6.6 Stapling blocks 6.6.1 Formats / Number of sheets 6.6.2 Block stapling with the Foldnak 8 6.6.3 Block stapling with Foldnak 6 and Foldnak 4 7 Accessories 7.1 Staples heads, staplers 7.2 Vertical vibrator 7.3 Coupling to assembling machines 7.4 Trimmer... -
Page 3: Description Of Function
2 Description of function 1. Control panel with main switch 2. Guard plate • The machine can only operated with closed guard plate 3. Slat conveyor 4. Turning handle 5. Opening to decouple the folding knife. 6. Protective cover • The machine can only operated with closed protective cover... -
Page 4: Safety Rules
• Loosen restraining screws between the Foldnak and the palette. • Only carry out repairs with original • Lift the machine from the palette and NAGEL spare parts. place the machine on a solid and • Only carry repairs after level surface. -
Page 5: Slat Conveyor
The slat conveyor (fig001, 3) (option vertical position and, after loosening the knurled screws, then secured. When with Foldnak 4) is folded upright for not in use, the axle with the transport transport and locked with a hook. wheels can be taken off, the axle... -
Page 6: Preparation
30 x 50 x 80 x 50 x 30 Foldnak 6 30 x 50 x 80 x 50 x 30 Foldnak 4 50 x 80 x 50 The driver (20) is re-set as described in Chap 8.2. By adjusting the stapler... -
Page 7: Staples
26 = Wire guage = Shank length in mm for 2 up to ca. 20 sheets Only use original Nagel staples. They Then swing back the magazine cover. are made with special precision and Insert the staples in this position. The... -
Page 8: Operation
Controls the separation of the brochures on the slat conveyor (see Chap. 6.5.7, only Foldnak 8). Foldnak 6 und Foldnak 4 do not have the switches (30) and (29). 6.2 Magazine control The Foldnak is fitted with a magazine control. -
Page 9: Staple Error Control
6.3 Staple error control 6.5 Stapling brochures The foldnak is equipped with a staple 6.5.1 Formats / Number of sheets error control. The staple error control stops the machine triggering when there is a staple jam in the stapler head. In Paper formats from 140 x 210 mm to this condition the driver jumps out of 325 x 450 mm can be processed in the... -
Page 10: Adjustment Of The Side Stop
6.5.2 Adjustment of the side stop Then adjust the right stop. First of all adjust the side stop with the assistance of the scale (38) on the green table plate. To do this the knurled screw (39) is opened and the stop moved to the side. -
Page 11: Adjustment Of The Rear Stop
Adjustment: • Switch off Foldnak. • Insert a sheet of the format to be used. With Foldnak 6 and Foldnak 4, open • Loosen screw (49) and push the the guard plate (43) and lock it photocell under the sheet. -
Page 12: Triggering By Hand
6.5.7 Adjustment slat The switched-on machine now triggers conveyor automatically when the paper has been correctly inserted. In order to be able to optimally utilise The baffle plate has the function of a the capacity of the slat conveyor barrier, prevents single sheets... -
Page 13: Stapling Blocks
40 sheets the middle of the equipment table. Foldnak 6 40 sheets 30 sheets This task becomes unnecessary when Foldnak 4 40 sheets 30 sheets you use a vertical vibrator (see chap. 7.2). Depending upon how the paper is The first stapling should be a trial inserted, stapling can be, for instance, a stapling to check the adjustments. -
Page 14: Block Stapling With The Foldnak
6.6.2 Block stapling with Re 3.) Decouple the folding knife: Foldnak 8 With the Foldnak 8, blocks can be stapled in the form that the block is automatically laid out on the slat conveyor. Changing to corner or block stapling: 1. - Page 15 Re 4.) Adjust the slat conveyor: By adjusting the support (57) the slat Both transport wheels are inserted into conveyor folded angle the upper position of the axle brackets downwards. The collecting plate (55) is so that they somewhat brake the block folded upwards and retained in this that falls out.
-
Page 16: Block Stapling With Foldnak 6 And Foldnak
(fig005, 32) on the switch panel. The supplied block stapling stop When the stop is fitted, the paper can be (fig013, 66) (accessory for Foldnak 4) inserted in the machine from the front. is necessary for block stapling. The It knocks against the position (fig013, additional stop is to be guided into the 63). -
Page 17: Accessories
• Nr. 6274062: 5,000 Ring staples assembling towers: Ri 26/6 • Nagel ZN 10, ZN 8 • Watkiss Vario / Eco / Slim Vac 7.2 Vertical vibrator • Plockmatik 310, 306, 410, 406 • Duplo DC-10 mini, DC-8 / 6 mini The vertical vibrator replaces manual jogging during hand feed. -
Page 18: Coupling To Assembling Machines
Nagel accessories. Your Drivers are subject to wear and tear and Nagel dealer will happily advise you. must be changed occasionally. The driver (fig003, 20) is hung from a spigot (fig003, 16) and is secured with 7.4 Trimmer... -
Page 19: Stapler Head Care And Malfunctions
To change the driver, loosen the Then replace the stapler head and knurled screw and pull the driver from tighten the knurled screws (24). Staple the spigot which is sprung and on remnants in the guide channel can lead bearings, and pull it upwards out of the to driver breakage. -
Page 20: Rotating The Machine By Hand
8.5 Rotating the machine by hand 9 Technical data It can be necessary to rotate the • Manufacturer: Ernst Nagel GmbH, machine by hand for servicing. Breitwiesenstr. D-70565 Stuttgart, Germany • Pull the photocell cable (fig009, 50) • Electricity supply: See type plate on out of the plug socket for this. -
Page 21: Conformity Statement
10 Conformity statement This machine has been checked by the printing and paper technical committee of the employer’s liability insurance association for conformity with the CE European Norm and the requirements for tested security and complies with EC Directives 89/392 and 89/336. Norms used: EN 954-1, prEN 1010, EN 60204. - Page 23 Foldnak 4/6/8 SN:> 980704 02. 1998...
- Page 24 Ernst Nagel GmbH D – 70565 Stuttgart, Germany Inland 0711 78078 11 Export +49711 78078 21 Telefax +49711 78078 10 www.ernstnagel.com...
Need help?
Do you have a question about the FOLDNAK 4 and is the answer not in the manual?
Questions and answers