Selecting Speedometer Display Mode - Mercedes-Benz 2010 CL-Class Operator's Manual

216_AKB; 3; 90, en-US
d2ureepe,
Switching daytime running lamp mode
on or off (USA only)
X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Day Running Lamps function.
X
Press button a.
X
Press button a again if you would like
to change the current status.
Depending on the previous status, the
Daytime Running Lamps will be switched
on (Enabled) or off (Disabled).
With Daytime Running Lamps mode
Enabled selected and the exterior lamp
switch at position $ or c, the low-
beam headlamps are switched on when the
engine is running.
In low ambient light conditions the following
lamps will come on additionally:
Parking lamps
R
Tail lamps
R
License plate lamps
R
Side marker lamps
R
For more information on the daytime running
lamp mode, see "Lighting" (
i Make sure the exterior lamp switch is set
to M or c when you switch off the
daytime running lamps while driving at
night.
Showing or hiding additional
speedometer
You can have an additional digital
speedometer shown in the multifunction
Instrument cluster control system
display. Depending on the setting for the
speedometer display mode (
speed is shown in the unit of kilometers/hour
(setting miles) or miles/hour (setting km).
X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Add. Speedometer function.
X
Press button a.
X
Press button a again if you would like
to change the current status.
Depending on the previous status, the
Add. Speedometer will be switched On or
Off.

Selecting speedometer display mode

X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Units function.
X
Press button a.
Y page 276).
X
Press button a again if you would like
to change the current status.
Depending on the previous status, the
Display Unit Speed-/Odometer will be
switched to miles or km.
2009-05-15T11:47:50+02:00 - Seite 215
Version: 2.11.8.1
Y
215
page 215), the
Z